Pajisje për tuba hekuri dhe çeliku

Iron and Steel Pipe Fittings Featured Image
  • Iron and Steel Pipe Fittings

Përshkrim i shkurtër:

montim tubash prej hekuri dhe çeliku pa probleme dhe saldime

KODI HS: 73079300


  • Min.Sasia e porosisë:Një enë
  • Koha e prodhimit:zakonisht 25 ditë
  • Porti:Porti Xingang Tianjin në Kinë
  • Kushtet e pagesës:L/C,D/A,D/P,T/T
  • Çmimi:FOB CFR CIF
  • Vendi i origjinës:Kinë
    • Shkarkoni si PDF

    Detajet e produktit

    Etiketat e produktit

    Tianjin Youfa International Trade Co., Ltd

    Montim tubash me saldim me saldim dhe pa tegel çeliku me karbon

    BËrryl çeliku 45°, 90° DHE 180° KARBON

    Standardi: ASME/ANSI B16.9 / ASTM A235

    Nota: WPB;WPC

    45°ELBOW

    45° Bërryl

    90°ELBOW

    Bërryl 90°

    180°Elbow

    180° Bërryl

    Diameter i Jashtem Trashësi muri
    (mm)    		 Pesha teorike
    45° 90° 180°
    INCH MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323,9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    TEE E DREJTË DHE REDUCUESE

    Standardi: ASME/ANSI B16.9 / ASTM A234

    Nota: WPB;WPC

    TEE

    Tee e drejtë

    REDUCER TEE

    Tee reduktuese

    Diameter i Jashtem Diameter i Jashtem
    INCH MM INCH MM
    3/4x3/4 26,7x26,7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 219.1x219.1
    1x3/4 33.4x26.7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3x60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    REDUCENT KONQENTRIK DHE EQENTRIK

    Standardi: ASME/ANSI B16.9 / ASTM A234

    Nota: WPB;WPC

    CON REDUCER

    Reduktues CON

    ECC REDUCER

    Reduktues ECC

    Diameter i Jashtem Diameter i Jashtem
    INCH MM INCH MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33,4X26,7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3x33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Përshtatje e zezë e galvanizuar dhe e zezë

    Standardi: ENGB/T-3287;BS EN-10242;KHT300-6etj.

    Materiali: Hekur i lakueshëm

    Sipërfaqja: E zezë e galvanizuar ose natyrale

    Sipërfaqja e brendshme: Me ose pa veshur PVC

    Bushing

    MADHËSIA In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Bashkimi

    MADHËSIA In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    MADHËSIA In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    union

    Tee e drejtë

    MADHËSIA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    MADHËSIA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    bashkim

    MADHËSIA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    MADHËSIA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Prizë reduktuese

    Madhësia mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Madhësia mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1 ½ x 3/4 1½ x1
    A 49 49 49 53 53 53
    Madhësia mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x 1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Madhësia mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½ x 3/4 2 1/2x2 2½ x1¼ 2 ½ x 1½ 2 ½ x2
    A 72 72 72 72 72 72
    Madhësia mm 80x15 80 x 20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Madhësia mm 80x65 100 x 15 100x20 100 x 25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4 x 1½
    A 71 84 84 84 84 84
    Madhësia mm 100x50 100x65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Reducering Socket

    Kapak tetëkëndësh

    Madhësia In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Madhësia In 2
    mm 50
    A 32
    S 65
    Octagonal Cap

    Prizë e thjeshtë

    Madhësia In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 10 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Madhësia In 1 ½ 2 2 ½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    plain plug

    Thithat e fuçisë

    Madhësia In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Madhësia In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    cast_iron_nipple

    90 Bërryl

    Madhësia Në 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Madhësia In 1 ½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77.5 96.5 129
    90 elbow

    45 Bërryl

    Madhësia In 1/2 3/4 1 1¼ 1 ½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Madhësia In 2 ½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 .5 64 .5 129
    45 elbow

    Bërryl reduktues

    Madhësia In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Madhësia Në 1 ½ 2 2 ½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96.5
    B 65 74 90 100 120
    reducing elbow

    Duke reduktuarTee

    Madhësia In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Madhësia In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Madhësia In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Madhësia In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Madhësia In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Reducing Tee 异径三通

    Montim me brazdë prej çeliku të karbonit

    Standardi: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etj.

    Klasa e çelikut: GR.A GR.B

    Sipërfaqja: E lyer e kuqe ose e lyer blu ose e lyer me argjend

    KRYQ MEKANIK (ME RRAZIM)

    grooved mechanical cross
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    100x50 (4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65 (4x2-1/2) 114.3x76.1
    100x80 (4x3) 114.3x88.9
    125x65 (5x2-1/2) 139.7x76.1
    125x80 (5x3) 139.7x88.9
    150x65 (6x2-1/2) 165,1 x 76. 1
    150x80 (6x3) 165.1x88.9
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x80 (8x3) 219.1x88.9
    200x100 (8x4) 219.1x114.3

    KRYQ MEKANIKE (ME FIJE)

    threaded mechanical cross
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    50x25 (2x1) 60,3xRcl
    65x25 (2-1/2x1) 76. lxRcl
    65x40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88,9xRcl
    80x50 (3x2) 88,9xRc2
    100x25 (4x1) 108xRcl
    100x65 (4x2-1/2) 114,3xRc2-1/2
    125x25 (5x1) 133xRcl
    125x80 (5x3) 133xRc3
    125x25 (5x1) 139,7xRcl
    150x25 (6x1) 159xRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8x1) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    TEK MEKANIKE (ME RRAZIM)

    grooved mechanical tee
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    100x50 (4x2) 114,3x60.3
    100x80 (4x3) 114.3x88.9
    125x65 (5x2-1/2) 139.7x76.1
    125x80 (5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x100 (8x4) 219.1x114.3

    SHIFT MEKANIKE (ME FIJE)

    threaded mechanical tee
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    50x25 (2x1) 60,3xRcl
    65x25 (2-1/2x1) 76. lxRcl
    65x40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88,9xRcl
    80x50 (3x2) 88,9xRc2
    100x25 (4x1) 108xRcl
    100x65 (4x2-1/2) 108xRc2-1/2
    100x25 (4x1) 114.3xRcl
    100x65 (4x2-1/2) 114,3xRc2-1/2
    125x25 (5x1) 133xRcl
    125x80 (5x3) 133xRc3
    125x25 (5x1) 139,7xRcl

    TEE REDUCUESE (ME RRAZIM)

    grooved reducing tee
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    65x50 (2/1/2x2) 76.1x60.3
    80x65 (3x2-1/2) 88.9x76.1
    100x50 (4x2-1/2) 108x76.1
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x100 (5x4) 133x108
    125x65 (5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100 (6x4) 159x108
    150x125 (6x5) 159x133
    150x65 (6x2-1/2) 165,1 x 76. 1
    150x125 (6x5) 165.1x139.7
    200x50 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    TEE (ME RRAZIM)

    grooved tee
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    50 (2) 60.3
    65 (2-1/2) 76.1
    80 (3) 88.9
    100⑷ 108
    100⑷ 114.3
    125 (5) 133
    125 (5) 139.7
    150⑹ 159
    150 (6) 165.1
    150⑹ 168.3
    200⑻ 219.1

    KRYQI REDUCUES (ME RRAZIM)

    grooved reducing cross
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    100x65 (4x2-1/2) 114.3x76
    100x80 (4x3) 114.3x88.9
    125x65 (5x2-1/2) 139.7x76
    125x100 (5x4) 139.7x114.3
    150x65 (6x2-1/2) 165.1x76
    150x125 (6x5) 165.1x139.7
    200x100 (8x4) 219.1x114.3
    200x150 (8x6) 219.1x165.1

    KRYQ (ME RRAZIM)

    cross
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    65 (2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150 (6) 165
    200⑻ 219.1

    45° Bërryl

    45° elbow

    22,5° Bërryl

    22.5° elbow

    Bërryl 90°

    90° elbow
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    50⑵ 60.3
    65 (2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125 (5) 139.7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    REDUCER (ME FILE)

    Threaded reducer
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    50x20 (2x3/4) 60,3xRc3/4
    50x40 (2x1-1/2) 60,3xRcl-1/2
    65x25 (2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25 (3x1) 88,9xRcl
    80x65 (3x2-1/2) 88,9xRc2-1/2
    100x25 (4x1) 108xRcl
    100x25 (4x1) 114.3xRcl
    125x25 (5x1) 133xRcl
    125x25 (5x1) 139,7xRcl
    150x25 (6x1) 159xRcl
    150x80 (6x3) 159xRc3
    150x25 (6x1) 165. lxRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8xRcl) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    REDUCER (ME RRAZIM)

    grooved reducer
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50 (3x2) 88.9x60.3
    80x65 (3x2-1/2) 88.9x76.1
    100x65 (4x2-1/2) 108x76.1
    100x80 (4x3) 108x88.9
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x65 (5x2-1/2) 133x76.1
    125x100 (5x4) 133x114.3
    125x50 (5x2) 139.7x60.3
    125x100 (5x4) 139.7x114.3
    150x65 (6x2-1/2) 159x76.1
    150x125 (6x5) 159x139.7
    150x50 (6x2) 165.1x60.3
    150x125 (6x5) 165.1x139.7
    200x65 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    FLANGJË TË RËNDËS

    (ME RRAZIM)

    heavy duty flange
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm) PRESIONI I PUNES (MPA) DIMENSIONET (MM) NR.E VRIMAVE
    A B c D
    65 (2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    FLANGE ADAPTER

    (ME RRAZIM)

    ADAPTOR FLANGE
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm) PRESIONI I PUNES (MPA) DIMENSIONET (MM) NR.E VRIMAVE
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65 (2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 8\12

    FLANGE E VERBËR

    BLIND FLANGE
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm) PRESIONI I PUNES (MPA) LARTËSIA (MM)
    50⑵ 60.3 2.5 28
    65 (2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125 (5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36.5

    FLANGE ME FIJE

    THREADED FLANGE
    MADHËSIA NORMAL (mm/in) Diametri i jashtëm (mm) PRESIONI I PUNES (MPA) DIMENSIONET (MM) NR.E VRIMAVE
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32 (1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40 (1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50 (2) Rc2 1.6 20 13 125 155 4
    65 (2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    BULONAT DHE ARJAT

    bolts and nuts
    MADHËSIA GJATESI ME FIJE L1 GJATESIA TOTALE GJERËSIA BUSH BISHT GJERËSIA E ARRËS
    M10 x 55 30±3 55±1.2 14. 5±0.5 9. 6~10
    M10 x 60 30±3 60±1.2 14,5 + 0,5 9. 6~10
    M10 x 65 30±3 65±1.2 14. 5±0.5 9. 6~10
    M12 x 65 36+4 65±1.2 15,2±0,4 11. 6~12
    M12 x 70 36+4 70+1.2 15,2±0,4 11. 6 ~ 12
    M12 x 75 41+4 75+1.2 15,2±0,4 11. 6 ~ 12
    M16 x 85 44+4 85+1.2 19. 0-19.9 15. 3~16
    M20 x 120 50+5 120+2.0 24±0.8 18. 9~20

    Vetitë mekanike të bulonave nuk duhet të jenë më të ulëta se klasa 8.8 e specifikuar në GB / T 3098.1, dhe toleranca e filetos duhet të jetë 6G.Vetitë mekanike të dados duhet të përputhen me kërkesat e klasës 8 të specifikuara për dado në GB / T 3098.2, toleranca e filetos 6h.

    UNAZË E GARDENËS

    gasket ring
    EMRI GASHKETA REKOMANDIM I SHËRBIMIT TË PËRGJITHSHËM SHKALLË TEMPERATURE
    EPDM E Furnizimi me ujë, kullimi, ujërat e zeza dhe ajri me temperaturë normale, acid i dobët dhe alkali i dobët -30°C~+130°C
    NBR D Vajra me bazë nafte -20°C ~ +80°C
    GOME SILIKOMNI S Ujë të pijshëm, ajër të nxehtë të thatë dhe disa kimikate të nxehta -40°C~+180°C

    Fllanxha

    FLANÇE QAFË SALDIMI

    Standardi: ASME/ANSI B16.9 Nota: WPB

    welded nack flange
    NPS OD ID Trashësia Njësia e peshës
    inç mm mm mm kg
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323,9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    FLANGE E VERBËR

    Standardi: ASME/ANSI B16.9 Nota: WPB

    blind flange
    NPS OD ID Trashësia njësi e peshës
    inç mm mm mm kg
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323,9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    rrëshqitje në fllanxhë

    Standardi: ASME/ANSI B16.9 Nota: WPB

    slip on flange
    NPS OD ID Trashësia njësi e peshës
    inç mm mm mm kg
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    FLANGE ME FIJE

    Standardi: ASME/ANSI B16.9 Nota: WPB

    threaded flange
    NPS OD ID Trashësia njësi e peshës
    inç mm mm mm kg
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323,9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    DËSHIRONI TË PUNONI ME NE?

    NA KONTAKTONI
  • E mëparshme:
  • Tjetër:

    • PRODUKTET LIDHUR