Fittings tal-Pajpijiet tal-Ħadid u tal-Azzar

Fittings tal-Pajpijiet tal-Ħadid u l-Azzar Immaġni Dehru
  • Fittings tal-Pajpijiet tal-Ħadid u tal-Azzar
  • Fittings tal-Pajpijiet tal-Ħadid u tal-Azzar
  • Fittings tal-Pajpijiet tal-Ħadid u tal-Azzar

Deskrizzjoni Qasira:

Fittings tal-pajpijiet tal-azzar huma kollha fittings tal-pajpijiet li jġorru pressjoni

KODIĊI HS: 73079300


  • MOQ Għal Kull Daqs:2 tunnellati
  • Kwantità Minima tal-Ordni:Kontenitur wieħed
  • Ħin tal-Produzzjoni:ġeneralment 25 jum
  • Port tal-Kunsinna:Xingang Tianjin Port fiċ-Ċina
  • Termini ta' Ħlas:L/C, D/A, D/P, T/T
  • Marka:YOUFA
  • Prezz:FOB CFR CIF
  • Post tal-Oriġini:iċ-Ċina
    • Niżżel bħala PDF

    Dettalji tal-Prodott

    Tikketti tal-Prodott

    It-tipi ta' fittings tal-pajpijiet jistgħu jiġu kklassifikati skont l-użi tagħhom:

    Fittings tal-pajpijiet użati għall-konnessjoni tal-pajpijiet: flanġijiet, couplings, klampi tal-pajpijiet, couplings tal-kmiem.
    Fittings tal-pajpijiet użati biex jibdlu d-direzzjoni tal-pajpijiet: minkbejn, liwjiet.
    Fittings tal-pajpijiet użati biex ibiddlu d-dijametru tal-pajpijiet: ridutturi (eċċentriki u konċentriċi), minkbejn li jnaqqsu.
    Fittings tal-pajpijiet użati biex iżidu fergħat mal-pajpijiet: tees, crosses.
    Fittings tal-pajpijiet użati għas-siġillar tal-pajpijiet: gaskits, flanġijiet għomja, tappijiet tal-pajpijiet, tappijiet għomja.

    Armar tal-Pajpijiet Iwweldjati bil-Butt tal-Azzar tal-Karbonju u mingħajr Saldatura

    MINKEB TAL-AZZAR TAL-KARBONJU 45°, 90° U 180°

    Standard: ASME/ANSI B16.9 / ASTM A235

    Grad: WPB; WPC

    45°MINKEB

    45°Minkeb

    90°MINKEB

    90°Minkeb

    Minkeb ta' 180°

    Minkeb ta' 180°

    Dijametru ta' Barra Ħxuna tal-Ħajt
    (mm)    		 Piż Teoretiku
    45° 90° 180°
    PULZIER MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    TEE DRITTA U TNAQQIS

    Standard: ASME/ANSI B16.9 / ASTM A234

    Grad: WPB; WPC

    TEE

    Tee dritta

    TEE TAT-TNAQQIS

    Tee li Jnaqqas

    Dijametru ta' Barra Dijametru ta' Barra
    PULZIER MM PULZIER MM
    3/4x3/4 26.7x26.7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 219.1x219.1
    1x3/4 33.4x26.7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3zx60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    TNAQQIS KONĊENTRIKU U EĊĊENTRIKU

    Standard: ASME/ANSI B16.9 / ASTM A234

    Grad: WPB; WPC

    TNAQQIS TAL-KONTROLL

    Tnaqqis CON

    TNAQQIS TAL-ECC

    Tnaqqis tal-ECC

    Dijametru ta' Barra Dijametru ta' Barra
    PULZIER MM PULZIER MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33.4X26.7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Ħadid Malleabbli Galvanizzat u Armar Iswed

    Standard: ENGB/T-3287; BS EN-10242; KHT300-6eċċ.

    Materjal: Ħadid Malleabbli

    Wiċċ: Galvanizzat jew Iswed Naturali

    Wiċċ ta' ġewwa: Bil-PVC miksi jew mingħajru

    Bushing

    DAQS In 3/8*1/4 1/2 * 1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Unjoni

    DAQS In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    DAQS In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    unjoni

    Tee dritta

    DAQS In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    DAQS In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Igganċjar

    DAQS In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    DAQS In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Sokit li Jnaqqas

    Daqs mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Daqs mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1 ½x 3/4 1½ x1
    A 49 49 49 53 53 53
    Daqs mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Daqs mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½x3/4 2 1/2x2 2½ x1¼ 2 ½x1½ 2 ½ x2
    A 72 72 72 72 72 72
    Daqs mm 80x15 80x 20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Daqs mm 80x65 100 x15 100x20 100 x 25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Daqs mm 100x50 100x 65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Sokit li Jnaqqas

    Kappa Ottagonali

    Daqs In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Daqs In 2
    mm 50
    A 32
    S 65
    Kappa Ottagonali

    Plagg Sempliċi

    Daqs In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 1 0 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Daqs In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    plagg sempliċi

    Nipple tal-kanna

    Daqs In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Daqs In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    beżżula_tal-ħadid fondut

    90 Minkeb

    Daqs Jiena n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    Daqs In 1½ 2 sentejn. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48.5 57 68.5 77.5 96.5 129
    90 minkeb

    45 Minkeb

    Daqs In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Daqs In 2½ 3 4 6
    mm 65 80 100 150
    A 48.5 53.5 64.5 129
    45 minkeb

    Tnaqqis tal-Minkeb

    Daqs In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Daqs Fi 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77.5 96.5
    B 65 74 90 100 120
    tnaqqis tal-minkeb

    TnaqqisTee

    Daqs In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Daqs In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Daqs In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Daqs In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Daqs In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Tnaqqis Tee 异径三通

    Twaħħil bil-kanal

    Standard: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 eċċ.

    Grad tal-azzar: GR.A GR.B

    Wiċċ: Miżbugħ bl-Aħmar jew Miżbugħ bil-Blu jew Miżbugħ bil-Fidda

    SALIB MEKKANIKU (IMKANĊJAT)

    salib mekkaniku bil-kanali
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    100x50(4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65(4x2-1/2) 114.3x76.1
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65(6x2-1/2) 165.1x 76.1
    150x80(6x3) 165.1x88.9
    150x100 (6x4) 165.1x114.3
    200x65(8x2-1/2) 219.1x76.1
    200x80(8x3) 219.1x88.9
    200x100 (8x4) 219.1x114.3

    SALIB MEKKANIKU (BIL-ĦAJTA)

    salib mekkaniku bil-kamin
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 165. 1xRc3
    200x25(8x1) 219. lxRcl
    200x80(8x3) 219. 1xTc3

    T MEKKANIKU (BL-ISKANJAR)

    tee mekkaniku bil-kanal
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    100x50(4x2) 114,3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65(8x2-1/2) 219.1x76.1
    200x100 (8x4) 219.1x114.3

    T MEKKANIKU (BIL-ĦAJTA)

    tee mekkaniku bil-kamin
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65(4x2-1/2) 108xRc2-1/2
    100x25(4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    TEE TNAQQIS (IMNAQQAS)

    tee li tnaqqas bil-kanal
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    65x50(2/1/2x2) 76.1x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x50(4x2-1/2) 108x76.1
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x100(5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100 (6x4) 159x108
    150x125 (6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76.1
    150x125 (6x5) 165.1x139.7
    200x50(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    T (IMKANJAR)

    tee bil-kanal
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    50(2) 60.3
    65(2-1/2) 76.1
    80(3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150(6) 165.1
    150⑹ 168.3
    200⑻ 219.1

    SALIB TAT-TNAQQIS (IMNAQQAS)

    salib imnaqqas bil-kanali
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    100x65(4x2-1/2) 114.3x76
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 165.1x76
    150x125 (6x5) 165.1x139.7
    200x100 (8x4) 219.1x114.3
    200x150(8x6) 219.1x165.1

    SALIB (IMNAQQAR)

    salib
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200⑻ 219.1

    Minkeb ta' 45°

    Minkeb ta' 45°

    Minkeb ta' 22.5°

    Minkeb ta' 22.5°

    Minkeb ta' 90°

    Minkeb ta' 90°
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    TNAQQIS (BIL-ĦAJTA)

    Tnaqqis bil-kamin
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    50x20(2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25(2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25(3x1) 88.9xRcl
    80x65(3x2-1/2) 88.9xRc2-1/2
    100x25(4x1) 108xRcl
    100x25(4x1) 114.3xRcl
    125x25(5x1) 133xRcl
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 159xRc3
    150x25(6x1) 165. lxRcl
    150x80(6x3) 165. 1xRc3
    200x25(8xRcl) 219. lxRcl
    200x80(8x3) 219. 1xTc3

    TNAQQIS (IMKANĊAR)

    riduttur bil-kanali
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50(3x2) 88.9x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x65(4x2-1/2) 108x76.1
    100x80(4x3) 108x88.9
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100(5x4) 133x114.3
    125x50(5x2) 139.7x60.3
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 159x76.1
    150x125 (6x5) 159x139.7
    150x50(6x2) 165.1x60.3
    150x125 (6x5) 165.1x139.7
    200x65(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    FLANĠ TA' DAZJU TQIL

    (SKANJATI)

    flanġ heavy-duty
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm) PRESSJONI TAX-XOGĦOL (MPA) DIMENSJONIJIET (MM) NUMRU TA' TOQOB
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    FLANĠ TAL-ADAPTATUR

    (SKANJATI)

    FLANĠ TAL-ADAPTATUR
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm) PRESSJONI TAX-XOGĦOL (MPA) DIMENSJONIJIET (MM) NUMRU TA' TOQOB
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 812

    FLANĠ GĦOMJA

    FLANĠ GĦOMJA
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm) PRESSJONI TAX-XOGĦOL (MPA) GĦOLI (MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36.5

    Flanġ bil-kamin

    Flanġ bil-kamin
    DAQS NORMALI (mm/pulzieri) DIJAMETRU TA' BARRA (mm) PRESSJONI TAX-XOGĦOL (MPA) DIMENSJONIJIET (MM) NUMRU TA' TOQOB
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32(1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    BOLTIJIET U ĠEWŻ

    boltijiet u skorfini
    DAQS TUL BIL-ĦAJTA L1 TUL TOTALI WISA' TAL-BOLT TAL-FISHTAIL WISA' TAL-ĠEWŻ
    M10 x 55 30±3 55±1.2 14.5±0.5 9. 6~10
    M10 x 60 30±3 60±1.2 14.5 + 0.5 9. 6~10
    M10 x 65 30±3 65±1.2 14.5±0.5 9. 6~10
    M12 x 65 36+4 65±1.2 15.2±0.4 11. 6~12
    M12 x 70 36+4 70+1.2 15.2±0.4 11. 6 ~12
    M12 x 75 41+4 75+1.2 15.2±0.4 11. 6 ~12
    M16 x 85 44+4 85+1.2 19. 0-19. 9 15. 3~16
    M20 x 120 50+5 120+2.0 24±0.8 18. 9~20

    Il-proprjetajiet mekkaniċi tal-boltijiet m'għandhomx ikunu inqas mill-grad 8.8 speċifikat fil-GB/T 3098.1, u t-tolleranza tal-ħjut għandha tkun 6G. Il-proprjetajiet mekkaniċi tal-ġewż għandhom jikkonformaw mar-rekwiżiti tal-Grad 8 speċifikati għall-ġewż fil-GB/T 3098.2, tolleranza tal-ħjut 6h.

    ĊIRKU TAL-GASKET

    ċirku tal-gasket
    ISEM GASKET RAKKOMANDAZZJONI TAS-SERVIZZ ĠENERALI FIRXA TAT-TEMPERATURA
    EPDM E Provvista tal-ilma, drenaġġ, drenaġġ u arja f'temperatura normali, aċidu dgħajjef u alkali dgħajjef -30°Ċ ~ +130°Ċ
    NBR D Żjut ibbażati fuq il-pitrolju -20°C〜+80°C
    GOMMA TAS-SILIKON S Ilma tax-xorb, arja sħuna u niexfa u xi kimiċi sħan -40°Ċ ~ +180°Ċ

    Flanġ

    FLANĠ TAL-GĦONQ TAL-WELDRA

    Standard: ASME/ANSI B16.9 Grad: WPB

    flanġ tal-għonq iwweldjat
    NPS OD ID Ħxuna Piż tal-Unità
    pulzier mm mm mm kilogrammi
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    FLANĠ GĦOMJA

    Standard: ASME/ANSI B16.9 Grad: WPB

    flanġ għomja
    NPS OD ID Ħxuna piż unitarju
    pulzier mm mm mm kilogrammi
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    SLIP ON FLANGE

    Standard: ASME/ANSI B16.9 Grad: WPB

    flanġ li jiżloq
    NPS OD ID Ħxuna piż unitarju
    pulzier mm mm mm kilogrammi
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    Flanġ bil-kamin

    Standard: ASME/ANSI B16.9 Grad: WPB

    flanġ bil-kamin
    NPS OD ID Ħxuna piż unitarju
    pulzier mm mm mm kilogrammi
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    TRID TAĦDEM MAGĦNA?

    IKKUNTATTJANA
  • Preċedenti:
  • Li jmiss:

    • PRODOTTI RELATATI

    Agħfas enter biex tfittex jew ESC biex tagħlaq