Fitting Pipa Wesi lan Baja

Gambar Unggulan Kelengkapan Pipa Besi lan Baja
  • Fitting Pipa Wesi lan Baja
  • Fitting Pipa Wesi lan Baja
  • Fitting Pipa Wesi lan Baja

Katrangan Cekak:

Piranti sambungan pipa baja kabeh kalebu piranti sambungan pipa sing nganggo tekanan

KODE HS: 73079300


  • MOQ saben Ukuran:2 ton
  • Jumlah Pesanan Minimal:Siji wadhah
  • Wektu Produksi:biasane 25 dina
  • Pelabuhan Pangiriman:Pelabuhan Xingang Tianjin ing China
  • Katentuan Pembayaran:L/C,D/A,D/P,T/T
  • Merek:YOUFA
  • Rega:FOB CFR CIF
  • Panggonan Asal:Tiongkok
    • Unduh minangka PDF

    Rincian Produk

    Tag Produk

    Jinis-jinis sambungan pipa bisa diklasifikasikake miturut panggunaane:

    Piranti sambungan pipa sing digunakake kanggo nyambungake pipa: flensa, kopling, klem pipa, kopling selongsong.
    Piranti sambungan pipa sing digunakake kanggo ngganti arah pipa: sikut, tikungan.
    Piranti sambungan pipa sing digunakake kanggo ngganti diameter pipa: reduksi (eksentrik lan konsentris), siku reduksi.
    Piranti sambungan pipa sing digunakake kanggo nambah cabang menyang pipa: tee, cross.
    Piranti sambungan pipa sing digunakake kanggo nutup pipa: gasket, flensa buta, tutup pipa, tutup buta.

    Fitting Pipa Baja Karbon sing Dilas Butt lan Seamless

    45°, 90° LAN 180° SIKU BAJA KARBON

    Standar: ASME/ANSI B16.9 / ASTM A235

    Kelas: WPB; WPC

    SIKU 45°

    Siku 45°

    SIKU 90°

    Siku 90°

    Siku 180°

    Siku 180°

    Diameter njaba Kekandelan Tembok
    (mm)    		 Bobot Teoretis
    45° 90° 180°
    INCI MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    TEE LURUS LAN REDUCER

    Standar: ASME/ANSI B16.9 / ASTM A234

    Kelas: WPB; WPC

    TEE

    Kaos Lurus

    TEE REDUCER

    Tee Pengurang

    Diameter njaba Diameter njaba
    INCI MM INCI MM
    3/4x3/4 26.7x26.7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 219.1x219.1
    1x3/4 33.4x26.7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3zx60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    REDUKTOR KONSENTRIK LAN EKSENTRIK

    Standar: ASME/ANSI B16.9 / ASTM A234

    Kelas: WPB; WPC

    PANGURANG CON

    Pangurang CON

    Pangurang ECC

    Pangurang ECC

    Diameter njaba Diameter njaba
    INCI MM INCI MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33.4X26.7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Wesi sing Bisa Dilentur, Galvanis, lan Pas Ireng

    Standar: ENGB/T-3287 ; BS EN-10242; KHT300-6lan liya-liyane.

    Bahan: Wesi sing bisa ditempa

    Lumahing: Galvanis utawa Ireng Alami

    Permukaan njero: Dilapisi PVC utawa Tanpa

    Bushing

    UKURAN In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Serikat

    UKURAN In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    UKURAN In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    persatuan

    Kaos Lurus

    UKURAN In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    UKURAN In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Kopling

    UKURAN In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    UKURAN In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Soket Pengurangan

    Ukuran mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Ukuran mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x 1 1½x1/2 1 ½x 3/4 1½ x 1
    A 49 49 49 53 53 53
    Ukuran mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x 1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Ukuran mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½x3/4 2 1/2x2 2½ x 1¼ 2 ½x1 ½ 2 ½ x 2
    A 72 72 72 72 72 72
    Ukuran mm 80x15 80x20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Ukuran mm 80x65 100 x 15 100x20 100x25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Ukuran mm 100x50 100x65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Soket Pengurangan

    Topi segi wolu

    Ukuran In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Ukuran In 2
    mm 50
    A 32
    S 65
    Topi segi wolu

    Colokan Biasa

    Ukuran In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 1 0 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Ukuran In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    colokan polos

    Puting Laras

    Ukuran In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Ukuran In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    puting_besi_cor

    90 Siku

    Ukuran Aku n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Ukuran In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77.5 96.5 129
    90 sikut

    45 Siku

    Ukuran In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Ukuran In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53.5 64.5 129
    45 sikut

    Ngurangi Siku

    Ukuran In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Ukuran Ing 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96.5
    B 65 74 90 100 120
    ngurangi sikut

    NgurangiKaos

    Ukuran In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Ukuran In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Ukuran In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Ukuran In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Ukuran In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Reducing Tee 异径三通

    Pas Alur

    Standar: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etc.

    Kelas baja: GR.A GR.B

    Lumahing: Dicet Abang utawa Dicet Biru utawa Dicet Perak

    LINTAS MEKANIK (BERALURAN)

    salib mekanik beralur
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    100x50 (4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65 (4x2-1/2) 114.3x76.1
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80 (5x3) 139.7x88.9
    150x65(6x2-1/2) 165.1x 76.1
    150x80 (6x3) 165.1x88.9
    150x100(6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x80 (8x3) 219.1x88.9
    200x100 (8x4) 219.1x114.3

    MEKANIK SILAR (BERUlir)

    salib mekanik berulir
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88.9xRcl
    80x50 (3x2) 88.9xRc2
    100x25 (4x1) 108xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80 (5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80 (6x3) 165. 1xRc3
    200x25(8x1) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    TEE MEKANIK (BERALURAN)

    tee mekanik beralur
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    100x50 (4x2) 114,3x60,3
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80 (5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x100 (8x4) 219.1x114.3

    TEE MEKANIK (BERUlir)

    tee mekanik berulir
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88.9xRcl
    80x50 (3x2) 88.9xRc2
    100x25 (4x1) 108xRcl
    100x65 (4x2-1/2) 108xRc2-1/2
    100x25 (4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80 (5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    TEE PENGURANG (BERALURAN)

    tee reduksi beralur
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    65x50(2/1/2x2) 76.1x60.3
    80x65 (3x2-1/2) 88.9x76.1
    100x50 (4x2-1/2) 108x76.1
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x100 (5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100(6x4) 159x108
    150x125(6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76.1
    150x125(6x5) 165.1x139.7
    200x50 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    TEE (Alur)

    tee beralur
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    50(2) 60.3
    65(2-1/2) 76.1
    80(3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150(6) 165.1
    150⑹ 168.3
    200⑻ 219.1

    Palang Pengurangan (Beralur)

    salib pangurang alur
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    100x65 (4x2-1/2) 114.3x76
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100 (5x4) 139.7x114.3
    150x65(6x2-1/2) 165.1x76
    150x125(6x5) 165.1x139.7
    200x100 (8x4) 219.1x114.3
    200x150 (8x6) 219.1x165.1

    SILAB (BERALUR)

    salib
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200⑻ 219.1

    Siku 45°

    Siku 45°

    Siku 22,5°

    Siku 22,5°

    Siku 90°

    Siku 90°
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    REDUCER (BERUlir)

    Reducer berulir
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    50x20 (2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25(2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25 (3x1) 88.9xRcl
    80x65 (3x2-1/2) 88.9xRc2-1/2
    100x25 (4x1) 108xRcl
    100x25 (4x1) 114.3xRcl
    125x25(5x1) 133xRcl
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80 (6x3) 159xRc3
    150x25(6x1) 165. lxRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8xRcl) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    REDUCER (BERALUR)

    reducer alur
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50 (3x2) 88.9x60.3
    80x65 (3x2-1/2) 88.9x76.1
    100x65 (4x2-1/2) 108x76.1
    100x80 (4x3) 108x88.9
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100 (5x4) 133x114.3
    125x50 (5x2) 139.7x60.3
    125x100 (5x4) 139.7x114.3
    150x65(6x2-1/2) 159x76.1
    150x125(6x5) 159x139.7
    150x50(6x2) 165.1x60.3
    150x125(6x5) 165.1x139.7
    200x65 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    Flensa Tugas Berat

    (Alur)

    flens tugas berat
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm) TEKANAN KERJA (MPA) UKURAN (MM) CACAH BOlongan
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    ADAPTOR FLANGE

    (Alur)

    ADAPTOR FLANGE
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm) TEKANAN KERJA (MPA) UKURAN (MM) CACAH BOlongan
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 812

    Flensa Buta

    Flensa Buta
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm) TEKANAN KERJA (MPA) Dhuwur (MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36.5

    Flensa Berulir

    Flensa Berulir
    UKURAN NORMAL (mm/in) DIAMETER NJABA (mm) TEKANAN KERJA (MPA) UKURAN (MM) CACAH BOlongan
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32(1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    Baut & Mur

    baut lan mur
    UKURAN Dawane Ulir L1 TOTAL DAWA Ambane Baut Buntut Ikan Ambane Kacang
    M10 x 55 30±3 55±1.2 14. 5±0. 5 9. 6~10
    M10 x 60 30±3 60±1.2 14.5 + 0.5 9. 6~10
    M10 x 65 30±3 65±1.2 14. 5±0. 5 9. 6~10
    M12 x 65 36+4 65±1.2 15.2±0.4 11. 6~12
    M12 x 70 36+4 70+1.2 15.2±0.4 11. 6 ~12
    M12 x 75 41+4 75+1.2 15.2±0.4 11. 6 ~12
    M16 x 85 44+4 85+1.2 19. 0-19. 9 15. 3~16
    M20 x 120 50+5 120+2.0 24±0.8 18. 9~20

    Sifat mekanik baut ora kena luwih murah tinimbang kelas 8.8 sing ditemtokake ing GB / T 3098.1, lan toleransi ulir kudu 6G. Sifat mekanik mur kudu tundhuk karo syarat Kelas 8 sing ditemtokake kanggo mur ing GB / T 3098.2, toleransi ulir 6h.

    Cincin Gasket

    cincin paking
    NAMA PAKING REKOMENDASI ​​LAYANAN UMUM RENTANG SUHU
    EPDM E Pasokan banyu, drainase, limbah lan suhu normal udara, asam lemah lan alkali lemah -30°C~+130°C
    NBR D Lenga adhedhasar minyak bumi -20°C ~ +80°C
    KARET SILICOMN S Banyu ngombe, hawa garing panas lan sawetara bahan kimia panas -40°C~+180°C

    Flens

    Flensa Leher Las

    Standar: ASME/ANSI B16.9 Kelas: WPB

    flens nack sing dilas
    NPS OD ID Kekandelan Bobot Unit
    inci mm mm mm kg
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    Flensa Buta

    Standar: ASME/ANSI B16.9 Kelas: WPB

    flens wuta
    NPS OD ID Kekandelan bobot unit
    inci mm mm mm kg
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    SLIP ON FLANGE

    Standar: ASME/ANSI B16.9 Kelas: WPB

    kepleset ing flens
    NPS OD ID Kekandelan bobot unit
    inci mm mm mm kg
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    Flensa Berulir

    Standar: ASME/ANSI B16.9 Kelas: WPB

    flens ulir
    NPS OD ID Kekandelan bobot unit
    inci mm mm mm kg
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    PENGEN KERJA SAMA KAMI?

    HUBUNGI KAMI
  • Sadurunge:
  • Sabanjure:

    • PRODUK-PRODUK SING GANGGUAN

    Pencet enter kanggo nggoleki utawa ESC kanggo nutup