Accessoris per a canonades de ferro i acer

Descripció breu:

accessoris de canonades de ferro i acer sense soldadura i soldadura

CODI HS: 73079300


  • Quantitat mínima de comanda:Un contenidor
  • Temps de producció:normalment 25 dies
  • Port:Port de Xingang Tianjin a la Xina
  • Condicions de pagament:L/C,D/A,D/P,T/T
  • Preu:FOB CFR CIF
  • Lloc d'origen:Xina
  • Detall del producte

    Etiquetes de producte

    COLZE D'ACER AL CARBONI 45°, 90° I 180°

    Estàndard: ASME/ANSI B16.9/ASTM A235

    Grau: WPB;WPC

    45°ELBOW

    Colze de 45°

    90°ELBOW

    Colze de 90°

    180°Elbow

    Colze de 180°

    Diàmetre exterior Gruix de paret
    (mm)
    Pes teòric
    45° 90° 180°
    polzades MM SCH40 KG KG KG
    1/2 21.3 2,77 0,04 0,08 0,16
    3/4 26.7 2,87 0,05 0.1 0,21
    1 33.4 3.38 0,08 0,16 0,3
    1 1/4 42.2 3,56 0,13 0,25 0,5
    1 1/2 48.3 3,68 0,18 0,38 0,72
    2 60.3 3,91 0,38 0,65 1.3
    2 1/2 73,0 5.16 0,65 1.29 2,58
    3 88,9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5,74 1.22 2.45 4,87
    4 114.3 6.02 1,93 3,85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7,96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323,9 9.53 38.6 66.1 108
    14 355,6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457,2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558,8 9.53 77 170 340
    24 609,6 9.53 101 202 404
    26 660,4 9.53 119 238 476

    TEE RECTA I REDUCTORA

    Estàndard: ASME/ANSI B16.9/ASTM A234

    Grau: WPB;WPC

    TEE

    Samarreta recta

    REDUCER TEE

    T reductora

    Diàmetre exterior Diàmetre exterior
    polzades MM polzades MM
    3/4x3/4 26,7 x 26,7 6x6 168,3x168,3
    3/4x1/2 26,7 x 21,3 6x5 168,3 x 141,3
    1x1 33,4 x 33,4 8x8 219,1 x 219,1
    1x3/4 33,4 x 26,7 8x6 219,1 x 168,3
    1 1/4x1 1/4 42,2x42,2 10x8 273 x 219,1
    1 1/4x1 42,2 x 33,4 10x10 273,1 x 273,1
    1 1/2x1 1/2 48,3x48,3 12x12 323,8 x 323,8
    1 1/2x1 1/4 48,3*42,2 12x10 323,8 x 273,1
    2x2 60,3zx60,3 14x14 355,6 x 355,6
    2x1 1/2 60,3 x 48,3 14x12 355,6 x 323,8
    3x3 88,9 x 88,9 18x18 457 x 457
    3x2 1/2 88,9 x 73 18x16 457 x 406,4
    4x4 114,3 x 114,3 20x20 508 x 508
    4x3 114,3 x 88,9 20x18 508 x 457
    5x5 141,3 x 141,3 24x24 610 x 610
    5x4 141,3 x 114,3 24x20 610x508

    REDUCTOR CONCÈNTRIC I EXCÈNTRIC

    Estàndard: ASME/ANSI B16.9/ASTM A234

    Grau: WPB;WPC

    CON REDUCER

    CON Reductor

    ECC REDUCER

    Reductor ECC

    Diàmetre exterior Diàmetre exterior
    polzades MM polzades MM
    3/4x1/2 26,7 x 21,3 5x3 141,3 x 88,9
    1X3/4 33,4X26,7 6x5 168,3 x 141,3
    1x1/2 33,4 x 21,3 6x4 168,3 x 114,3
    1 1/4x1 42,2 x 33,4 8x6 219,1 x 168,3
    1 1/4x3/4 42,2 x 26,7 8x4 219,1 x 114,3
    1 1/2x1 1/4 48,3*42,2 10x8 273,1 x 219,1
    1 1/2x1 48,3x33,4 10x6 273,1 x 168,3
    2x1 1/2 60,3 x 48,3 12x10 323,9 x 273,1
    2x1 60,3zx33,4 12x8 323,9 x 219,1
    2 1/2x2 73x60,3 14x12 355,6 x 323,8
    2 1/2x1 1/2 73x48,3 14x10 355,6 x 273,1
    3x2 1/2 88,9 x 73 18x16 457 x 406,4
    3x2 88,9 x 60,3 18x14 457 x 355,6
    4x3 114,3 x 88,9 20x18 508 x 457
    4x2 1/2 114,3 x 73 24x20 610x508
    5x4 141,3 x 114,3 24x18 610 x 457

    Estàndard: ENGB/T-3287;BS EN-10242;KHT300-6etc.

    Material: ferro mal·leable

    Superfície: galvanitzat o negre natural

    Superfície interior: amb o sense revestiment de PVC

    Buixa

    TALLA In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Unió

    TALLA In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    TALLA In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    union

    Samarreta recta

    TALLA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    TALLA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68,5 77,5 96,5 129
    DSC00019 拷贝

    Acoblament

    TALLA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    TALLA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Socket reductor

    Mida mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Mida mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1 ½ x 3/4 1½ x1
    A 49 49 49 53 53 53
    Mida mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Mida mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½x3/4 2 1/2x2 2½ x1¼ 2 ½x1½ 2 ½ x2
    A 72 72 72 72 72 72
    Mida mm 80x15 80 x 20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Mida mm 80x65 100 x 15 100 x 20 100 x 25 100 x 32 100 x 40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Mida mm 100 x 50 100 x 65 100 x 80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Reducering Socket

    Cap octogonal

    Mida In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Mida In 2
    mm 50
    A 32
    S 65
    Octagonal Cap

    Endoll normal

    Mida In 1/4 3/8 1/2 3/4 1
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 10 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Mida In 2 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    plain plug

    Mugró de barril

    Mida In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Mida In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    cast_iron_nipple

    90 Colze

    Mida jo n 1/4 3/8 1/2 3/4 1
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Mida In 2 2Y. 3 4 6
    mm 40 50 65 80 100 150
    A 48 .5 57 68 .5 77,5 96,5 129
    90 elbow

    45 Colze

    Mida In 1/2 3/4 1 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Mida In 3 4 6
    mm 65 80 100 150
    A 48 .5 53 .5 64 .5 129
    45 elbow

    Colze reductor

    Mida In 1/4 3/8 1/2 3/4 1
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Mida En 2 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96,5
    B 65 74 90 100 120
    reducing elbow

    ReduintTee

    Mida In 1,25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Mida In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Mida In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Mida In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59,5 49,5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Mida In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40x65
    A 54.5 57,5 61,5 61,5
    B 69 71 71 71
    C 51.5 54.5 59,5 59,5
    Reducing Tee 异径三通

    Estàndard: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616, etc.

    Qualitat d'acer: GR.A GR.B

    Superfície: pintat de vermell o pintat de blau o pintat de plata

    CREU MECÀNICA (RANURADA)

    grooved mechanical cross
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    100 x 50 (4 x 2) 114,3 x 60,3
    100 x 65 (4 x 2-1/2) 114,3 x 73
    100 x 65 (4 x 2-1/2) 114,3 x 76.1
    100 x 80 (4 x 3) 114,3 x 88,9
    125 x 65 (5 x 2-1/2) 139,7 x 76.1
    125 x 80 (5 x 3) 139,7 x 88,9
    150 x 65 (6 x 2-1/2) 165,1 x 76. 1
    150 x 80 (6 x 3) 165,1 x 88,9
    150 x 100 (6 x 4) 165,1 x 114,3
    200 x 65 (8 x 2-1/2) 219,1 x 76,1
    200 x 80 (8 x 3) 219,1 x 88,9
    200 x 100 (8 x 4) 219,1 x 114,3

    CREU MECÀNICA (ROSCA)

    threaded mechanical cross
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    50 x 25 (2 x 1) 60,3xRcl
    65 x 25 (2-1/2 x 1) 76. lxRcl
    65 x 40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80 x 25 (3 x 1) 88,9xRcl
    80 x 50 (3 x 2) 88,9xRc2
    100 x 25 (4 x 1) 108xRcl
    100 x 65 (4 x 2-1/2) 114,3xRc2-1/2
    125 x 25 (5 x 1) 133xRcl
    125 x 80 (5 x 3) 133xRc3
    125 x 25 (5 x 1) 139,7xRcl
    150 x 25 (6 x 1) 159xRcl
    150 x 80 (6 x 3) 165. 1xRc3
    200 x 25 (8 x 1) 219. lxRcl
    200 x 80 (8 x 3) 219. 1xRc3

    TEE MECÀNICA (RANURADA)

    grooved mechanical tee
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    100 x 50 (4 x 2) 114,3x60,3
    100 x 80 (4 x 3) 114,3 x 88,9
    125 x 65 (5 x 2-1/2) 139,7 x 76,1
    125 x 80 (5 x 3) 139,7 x 88,9
    150 x 65 (6 x 2-1/2) 165,1 x 76,1
    150 x 100 (6 x 4) 165,1 x 114,3
    200 x 65 (8 x 2-1/2) 219,1 x 76,1
    200 x 100 (8 x 4) 219,1 x 114,3

    TEE MECÀNICA (ROSCA)

    threaded mechanical tee
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    50 x 25 (2 x 1) 60,3xRcl
    65 x 25 (2-1/2 x 1) 76. lxRcl
    65 x 40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80 x 25 (3 x 1) 88,9xRcl
    80 x 50 (3 x 2) 88,9xRc2
    100 x 25 (4 x 1) 108xRcl
    100 x 65 (4 x 2-1/2) 108xRc2-1/2
    100 x 25 (4 x 1) 114,3xRcl
    100 x 65 (4 x 2-1/2) 114,3xRc2-1/2
    125 x 25 (5 x 1) 133xRcl
    125 x 80 (5 x 3) 133xRc3
    125 x 25 (5 x 1) 139,7xRcl

    TEE REDUCTORA (RANURADA)

    grooved reducing tee
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    65 x 50 (2/1/2 x 2) 76,1 x 60,3
    80 x 65 (3 x 2-1/2) 88,9 x 76,1
    100 x 50 (4 x 2-1/2) 108 x 76,1
    100 x 50 (4 x 2) 114,3 x 60,3
    100 x 80 (4 x 3) 114,3 x 88,9
    125 x 100 (5 x 4) 133 x 108
    125 x 65 (5 x 2-1/2) 139,7 x 76,1
    125 x 100 (5 x 4) 139,7 x 114,3
    150 x 100 (6 x 4) 159 x 108
    150 x 125 (6 x 5) 159 x 133
    150 x 65 (6 x 2-1/2) 165,1 x 76. 1
    150 x 125 (6 x 5) 165,1 x 139,7
    200 x 50 (8 x 2) 219,1 x 60,3
    200 x 150 (8 x 6) 219,1 x 165,1

    TEE (RANURADA)

    grooved tee
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    50 (2) 60.3
    65 (2-1/2) 76.1
    80 (3) 88,9
    100⑷ 108
    100⑷ 114.3
    125 (5) 133
    125 (5) 139,7
    150⑹ 159
    150 (6) 165.1
    150⑹ 168.3
    200⑻ 219.1

    CREU REDUCTORA (RANURADA)

    grooved reducing cross
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    100 x 65 (4 x 2-1/2) 114,3 x 76
    100 x 80 (4 x 3) 114,3 x 88,9
    125 x 65 (5 x 2-1/2) 139,7 x 76
    125 x 100 (5 x 4) 139,7 x 114,3
    150 x 65 (6 x 2-1/2) 165,1 x 76
    150 x 125 (6 x 5) 165,1 x 139.7
    200 x 100 (8 x 4) 219,1 x 114,3
    200 x 150 (8 x 6) 219,1 x 165,1

    CREU (RANURADA)

    cross
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    65 (2-1/2) 76.1
    80⑶ 88,9
    100⑷ 114.3
    125⑸ 139,7
    150 (6) 165
    200⑻ 219.1

    Colze de 45°

    45° elbow

    Colze de 22,5°

    22.5° elbow

    Colze de 90°

    90° elbow
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    50⑵ 60.3
    65 (2-1/2) 76.1
    80⑶ 88,9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125 (5) 139,7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    REDUCTOR (ROSCAT)

    Threaded reducer
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    50 x 20 (2 x 3/4) 60,3xRc3/4
    50 x 40 (2 x 1-1/2) 60,3xRcl-1/2
    65 x 25 (2-1/2 x 1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80 x 25 (3 x 1) 88,9xRcl
    80 x 65 (3 x 2-1/2) 88,9xRc2-1/2
    100 x 25 (4 x 1) 108xRcl
    100 x 25 (4 x 1) 114,3xRcl
    125 x 25 (5 x 1) 133xRcl
    125 x 25 (5 x 1) 139,7xRcl
    150 x 25 (6 x 1) 159xRcl
    150 x 80 (6 x 3) 159xRc3
    150 x 25 (6 x 1) 165. lxRcl
    150 x 80 (6 x 3) 165. 1xRc3
    200x25 (8xRcl) 219. lxRcl
    200 x 80 (8 x 3) 219. 1xRc3

    REDUCTOR (RANURADO)

    grooved reducer
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm)
    65 x 50 (2-1/2 x 2) 76,1 x 60,3
    80 x 50 (3 x 2) 88,9 x 60,3
    80 x 65 (3 x 2-1/2) 88,9 x 76,1
    100 x 65 (4 x 2-1/2) 108 x 76,1
    100 x 80 (4 x 3) 108 x 88,9
    100 x 50 (4 x 2) 114,3 x 60,3
    100 x 80 (4 x 3) 114,3 x 88,9
    125 x 65 (5 x 2-1/2) 133 x 76,1
    125 x 100 (5 x 4) 133 x 114,3
    125 x 50 (5 x 2) 139,7 x 60,3
    125 x 100 (5 x 4) 139,7 x 114,3
    150 x 65 (6 x 2-1/2) 159 x 76,1
    150 x 125 (6 x 5) 159 x 139,7
    150 x 50 (6 x 2) 165,1 x 60,3
    150 x 125 (6 x 5) 165,1 x 139,7
    200 x 65 (8 x 2) 219,1 x 60,3
    200 x 150 (8 x 6) 219,1 x 165,1

    BRIDA REFORTABLE

    (RANAU)

    heavy duty flange
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm) PRESSIÓ DE TREBALL (MPA) DIMENSIONS (MM) NO.DE FORATS
    A B c D
    65 (2-1/2) 76.1 2.5 63,5 17 185 145 8
    65⑶ 88,9 2.5 63,5 17 200 160 8
    100⑷ 108 2.5 67,5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    BRIDA ADAPTADORA

    (RANAU)

    ADAPTOR FLANGE
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm) PRESSIÓ DE TREBALL (MPA) DIMENSIONS (MM) NO.DE FORATS
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65 (2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88,9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139,7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 8\12

    BRIDA CEGA

    BLIND FLANGE
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm) PRESSIÓ DE TREBALL (MPA) ALTURA (MM)
    50⑵ 60.3 2.5 28
    65 (2-1/2) 76.1 2.5 28
    80⑶ 88,9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125 (5) 133 2.5 31.5
    125⑸ 139,7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36.5

    BRIDA ROSCADA

    THREADED FLANGE
    MIDA NORMAL (mm/in) DIÀMETRE EXTERIOR (mm) PRESSIÓ DE TREBALL (MPA) DIMENSIONS (MM) NO.DE FORATS
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32 (1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40 (1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50 (2) Rc2 1.6 20 13 125 155 4
    65 (2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193,5 8
    100⑷ Rc4 1.6 25.75 15 180 213,5 8

    CARNONS I FEIXES

    bolts and nuts
    TALLA LONGITUD ROSCA L1 LONGITUD TOTAL AMPLADA DEL PERN DE CUA DE PIX AMPLADA DE NUTS
    M10 x 55 30±3 55±1,2 14. 5±0.5 9. 6~10
    M10 x 60 30±3 60±1,2 14,5 + 0,5 9. 6~10
    M10 x 65 30±3 65±1,2 14. 5±0.5 9. 6~10
    M12 x 65 36+4 65±1,2 15,2±0,4 11. 6~12
    M12 x 70 36+4 70+1.2 15,2±0,4 11. 6 ~12
    M12 x 75 41+4 75+1.2 15,2±0,4 11. 6 ~12
    M16 x 85 44+4 85+1.2 19. 0-19.9 15. 3~16
    M20 x 120 50+5 120+2.0 24±0,8 18. 9~20

    Les propietats mecàniques dels cargols no han de ser inferiors al grau 8.8 especificat a GB / T 3098.1, i la tolerància del fil ha de ser de 6G.Les propietats mecàniques de la femella han de complir amb els requisits de grau 8 especificats per a femelles a GB / T 3098.2, tolerància de rosca 6h.

    ANELL DE JUNTA

    gasket ring
    NOM JUNTA RECOMANACIÓ GENERAL DEL SERVEI RANG DE TEMPERATURA
    EPDM E Subministrament d'aigua, drenatge, aigües residuals i aire de temperatura normal, àcid feble i àlcali feble -30°C~+130°C
    NBR D Olis a base de petroli -20°C〜+80°C
    GOMA SILICOMÒ S Aigua potable, aire sec calent i alguns productes químics calents -40°C~+180°C

    BRIDA DE COLL DE SOLDADURA

    Estàndard: ASME/ANSI B16.9 Grau: WPB

    welded nack flange
    NPS OD ID Gruix Unitat de pes
    polzada mm mm mm kgs
    1/2 89 21.3 11.5 0,5
    3/4 99 26.9 13 0,7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88,9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323,9 32 39
    14 533 355,6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    BRIDA CEGA

    Estàndard: ASME/ANSI B16.9 Grau: WPB

    blind flange
    NPS OD ID Gruix unitat de pes
    polzada mm mm mm kgs
    1/2 89 21.3 11.5 0,4
    3/4 99 26.9 13 0,7
    1 108 33.7 16 0,9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88,9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323,9 32 45
    14 533 355,6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    LLIMINACIÓ A LA BRIDA

    Estàndard: ASME/ANSI B16.9 Grau: WPB

    slip on flange
    NPS OD ID Gruix unitat de pes
    polzada mm mm mm kgs
    1/2 89 22.5 11.5 0,4
    3/4 99 28 13 0,7
    1 108 34.5 14 0,8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49,5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90,5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170,5 25.5 7.5
    8 343 221,5 29 12.6
    10 406 276,5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410,5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    BRIDA ROSCADA

    Estàndard: ASME/ANSI B16.9 Grau: WPB

    threaded flange
    NPS OD ID Gruix unitat de pes
    polzada mm mm mm kgs
    1/2 89 21.3 11.5 0,4
    3/4 99 26.9 13 0,7
    1 108 33.7 14.5 0,9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88,9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323,9 32 29.5
    14 533 355,6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    VOLS TREBALLAR AMB NOSALTRES?


  • Anterior:
  • Pròxim: