Pemasangan Alur Baja Karbon
Standar: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etc.
Kelas baja: GR.A GR.B
Lumahing: Red Painted utawa Blue Painted utawa Silver Painted
LINTANG MEKANIKAL (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 100x50 (4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114,3x73 |
| 100x65(4x2-1/2) | 114.3x76.1 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139,7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65(6x2-1/2) | 165.1x 76. 1 |
| 150x80 (6x3) | 165.1x88.9 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x80 (8x3) | 219.1x88.9 |
| 200x100 (8x4) | 219.1x114.3 |
LINTANG MEKANIKAL (THREADED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8x1) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
TEE MEKANIK (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x100 (8x4) | 219.1x114.3 |
TEE MEKANIK (THREADED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65(4x2-1/2) | 108xRc2-1/2 |
| 100x25 (4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
TEE REDUCING (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 65x50(2/1/2x2) | 76.1x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x100 (5x4) | 133x108 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x100 (6x4) | 159x108 |
| 150x125 (6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x50 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
TEE (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50 (2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80 (3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
REDUCING CROSS (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 100x65(4x2-1/2) | 114.3x76 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139,7x76 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 165.1x76 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x100 (8x4) | 219.1x114.3 |
| 200x150 (8x6) | 219.1x165.1 |
SALANG (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° Siku
22.5° Siku
90° Siku
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUCER (ULANG)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x65(3x2-1/2) | 88.9xRc2-1/2 |
| 100x25 (4x1) | 108xRcl |
| 100x25 (4x1) | 114.3xRcl |
| 125x25 (5x1) | 133xRcl |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 159xRc3 |
| 150x25 (6x1) | 165. lxRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8xRcl) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
REDUCER (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50 (3x2) | 88.9x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x65(4x2-1/2) | 108x76.1 |
| 100x80 (4x3) | 108x88.9 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 133x76.1 |
| 125x100 (5x4) | 133x114.3 |
| 125x50 (5x2) | 139.7x60.3 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 159x76.1 |
| 150x125 (6x5) | 159x139.7 |
| 150x50 (6x2) | 165.1x60.3 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x65 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
FLANGE tugas abot
(GORENG)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | UKURAN (MM) | NO.saka bolongan | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
Adaptor FLANGE
(GORENG)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | UKURAN (MM) | NO.saka bolongan | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | Dhuwur (MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65(2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
FLANGE Utas
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | UKURAN (MM) | NO.saka bolongan | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32 (1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40 (1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50 (2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOLTS & NUTS
| UKURAN | PANJANG Utas L1 | DONGENG TOTAL | FISHTAIL BOLT WIDTH | NUT WIDHT |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0.5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14,5 + 0,5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0.5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1.2 | 15.2±0.4 | 11. 6 ~ 12 |
| M12 x 75 | 41+4 | 75+1.2 | 15.2±0.4 | 11. 6 ~ 12 |
| M16 x 85 | 44+4 | 85+1.2 | 19. 0-19.9 | 15. 3~16 |
| M20 x 120 Kab | 50+5 | 120+2.0 | 24±0.8 | 18. 9~20 |
Sifat mekanik bolt ora luwih murah tinimbang kelas 8.8 sing ditemtokake ing GB / T 3098.1, lan toleransi benang kudu 6G.Sifat mekanik kacang kudu tundhuk karo syarat Grade 8 sing ditemtokake kanggo kacang ing GB / T 3098.2, toleransi benang 6h.
RING GASKET
| NAMA | GASKET | REKOMENDASI PELAYANAN UMUM | RANGE SUHU |
| EPDM | E | Pasokan banyu, got, limbah lan hawa suhu normal, asam lemah lan alkali sing lemah | -30°C~+130°C |
| NBR | D | Minyak adhedhasar petroleum | -20°C ~+80°C |
| KARET SILIKON | S | Banyu ngombé, hawa garing panas lan sawetara bahan kimia panas | -40°C~+180°C |
Fittings Pipa Grooved Painted Biru
Bagan ukuran kaya ing ndhuwur
Sliver Painted Pipa alur Fittings
Bagan ukuran kaya ing ndhuwur
