Carbon Steel Grooved Fitting
Standard: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etc.
Steel nga grado: GR.A GR.B
Ibabaw: Pula nga Pinintura o Asul nga Pinintura o Pilak nga Pinintura
MECHANICAL CROSS (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 100x50(4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65(4x2-1/2) | 114.3x76.1 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65(6x2-1/2) | 165.1x 76. 1 |
| 150x80(6x3) | 165.1x88.9 |
| 150x100(6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x80(8x3) | 219.1x88.9 |
| 200x100(8x4) | 219.1x114.3 |
MECHANICAL CROSS (NAGULAT)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8x1) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
MECHANICAL TEE (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 100x50(4x2) | 114,3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x100(8x4) | 219.1x114.3 |
MEKANIKAL NGA TEE (NAG-THREAD)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65(4x2-1/2) | 108xRc2-1/2 |
| 100x25(4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
PAGKAWAS NGA TEE (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 65x50(2/1/2x2) | 76.1x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x50(4x2-1/2) | 108x76.1 |
| 100x50(4x2) | 114.3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x100(5x4) | 133x108 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x100(6x4) | 159x108 |
| 150x125(6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125(6x5) | 165.1x139.7 |
| 200x50(8x2) | 219.1x60.3 |
| 200x150(8x6) | 219.1x165.1 |
TEE (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 50(2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
PAGKUBOS NGA KRUS (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 100x65(4x2-1/2) | 114.3x76 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 165.1x76 |
| 150x125(6x5) | 165.1x139.7 |
| 200x100(8x4) | 219.1x114.3 |
| 200x150(8x6) | 219.1x165.1 |
KRUS (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° Siko
22.5° Siko
90° Siko
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 50⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUCER (NAG-THREAD)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 50x20(2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25(3x1) | 88.9xRcl |
| 80x65(3x2-1/2) | 88.9xRc2-1/2 |
| 100x25(4x1) | 108xRcl |
| 100x25(4x1) | 114.3xRcl |
| 125x25(5x1) | 133xRcl |
| 125x25(5x1) | 139.7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 159xRc3 |
| 150x25(6x1) | 165. lxRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8xRcl) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
REDUCER (GROOVED)
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50(3x2) | 88.9x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x65(4x2-1/2) | 108x76.1 |
| 100x80(4x3) | 108x88.9 |
| 100x50(4x2) | 114.3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 133x76.1 |
| 125x100(5x4) | 133x114.3 |
| 125x50(5x2) | 139.7x60.3 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 159x76.1 |
| 150x125(6x5) | 159x139.7 |
| 150x50(6x2) | 165.1x60.3 |
| 150x125(6x5) | 165.1x139.7 |
| 200x65(8x2) | 219.1x60.3 |
| 200x150(8x6) | 219.1x165.1 |
HEAVY DUTY FLANGE
(GROOVED)
| NORMAL NGA LAKI(mm/in) | GAWAS DIAMETER(mm) | PRESSURE SA PAGTRABAHO(MPA) | MGA DIMENSYON(MM) | DILI.SA MGA BUTANG | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTER FLANGE
(GROOVED)
| NORMAL NGA LAKI(mm/in) | GAWAS DIAMETER(mm) | PRESSURE SA PAGTRABAHO(MPA) | MGA DIMENSYON(MM) | DILI.SA MGA BUTANG | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
| NORMAL NGA LAKI(mm/in) | GAWAS DIAMETER(mm) | PRESSURE SA PAGTRABAHO(MPA) | GATAAS(MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65(2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
GILITOK NGA FLANGE
| NORMAL NGA LAKI (mm/in) | GAWAS DIAMETER(mm) | PRESSURE SA PAGTRABAHO(MPA) | MGA DIMENSYON(MM) | DILI.SA MGA BUTANG | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32(1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40(1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOLTS UG NUTS
| KADAKO | Gitas-on sa linubid L1 | TOTAL GADUGA | FISHTAIL BOLT LADAD | LABAW NGA NUT |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0.5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14.5 + 0.5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0.5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1.2 | 15.2±0.4 | 11. 6 ~ 12 |
| M12 x 75 | 41+4 | 75+1.2 | 15.2±0.4 | 11. 6 ~ 12 |
| M16 x 85 | 44+4 | 85+1.2 | 19. 0-19.9 | 15. 3~16 |
| M20 x 120 | 50+5 | 120+2.0 | 24±0.8 | 18. 9~20 |
Ang mekanikal nga mga kabtangan sa bolts kinahanglan nga dili ubos pa kay sa grado 8.8 nga gitakda sa GB / T 3098.1, ug ang thread tolerance kinahanglan nga 6G.Ang mekanikal nga mga kabtangan sa nut kinahanglan nga mosunod sa mga kinahanglanon sa Grade 8 nga gilatid alang sa mga nuts sa GB / T 3098.2, thread tolerance 6h.
GASKET RING
| NGALAN | GASKET | KINATIBUK-ANG SERBISYO REKOMENDASYON | RANGE SA TEMPERATURA |
| EPDM | E | Ang suplay sa tubig, drainage, sewage ug normal nga temperatura sa hangin, huyang nga acid ug huyang nga alkali | -30°C~+130°C |
| NBR | D | Mga lana nga gibase sa petrolyo | -20°C〜+80°C |
| SILICOMN RUBBER | S | Pag-inom og tubig, init nga uga nga hangin ug pipila ka init nga kemikal | -40°C~+180°C |
Asul nga Pinintura nga Grooved Pipe Fittings
Size chart sama sa ibabaw
Sliver Painted Grooved Pipe Fittings
Size chart sama sa ibabaw
