Koolstofstaal gegroefde fitting
Standaard: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 enz.
Staalsoort: GR.A GR.B
Oppervlak: rood geverfd of blauw geverfd of zilver geverfd
MECHANISCHE KRUIS (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 100x50(4x2) | 114,3x60,3 |
| 100x65 (4x2-1/2) | 114,3x73 |
| 100x65(4x2-1/2) | 114,3x76.1 |
| 100x80(4x3) | 114,3x88,9 |
| 125x65 (5x2-1/2) | 139,7x76.1 |
| 125x80(5x3) | 139,7x88,9 |
| 150x65(6x2-1/2) | 165.1x 76. 1 |
| 150x80(6x3) | 165,1x88,9 |
| 150x100(6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219,1x76.1 |
| 200x80(8x3) | 219.1x88.9 |
| 200x100(8x4) | 219,1x114.3 |
MECHANISCHE KRUIS (DRAAD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114,3xRc2-1 / 2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139,7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8x1) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
MECHANISCH T-STUK (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 100x50(4x2) | 114,3x60,3 |
| 100x80(4x3) | 114,3x88,9 |
| 125x65 (5x2-1/2) | 139,7x76,1 |
| 125x80(5x3) | 139,7x88,9 |
| 150x65 (6x2-1 / 2） | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219,1x76.1 |
| 200x100(8x4) | 219,1x114.3 |
MECHANISCHE T-STUK (DRAAD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65(4x2-1/2) | 108xRc2-1 / 2 |
| 100x25(4x1) | 114,3xRcl |
| 100x65 (4x2-1/2) | 114,3xRc2-1 / 2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139,7xRcl |
VERMINDERING TEE (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 65x50(2/1/2x2) | 76,1x60,3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x50(4x2-1/2) | 108x76.1 |
| 100x50(4x2) | 114,3x60,3 |
| 100x80(4x3) | 114,3x88,9 |
| 125x100 (5x4) | 133x108 |
| 125x65 (5x2-1/2) | 139,7x76,1 |
| 125x100 (5x4) | 139,7x114.3 |
| 150x100(6x4) | 159x108 |
| 150x125(6x5) | 159x133 |
| 150x65 (6x2-1 / 2） | 165.1x 76. 1 |
| 150x125(6x5) | 165,1x139,7 |
| 200x50(8x2) | 219,1x60,3 |
| 200x150(8x6) | 219,1x165,1 |
T-STUK (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 50(2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125 (5) | 133 |
| 125 (5) | 139,7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219,1 |
KRUIS VERMINDEREN (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 100x65(4x2-1/2) | 114,3x76 |
| 100x80(4x3) | 114,3x88,9 |
| 125x65 (5x2-1/2) | 139,7x76 |
| 125x100 (5x4) | 139,7x114.3 |
| 150x65(6x2-1/2) | 165,1x76 |
| 150x125(6x5) | 165.1x139.7 |
| 200x100(8x4) | 219,1x114.3 |
| 200x150(8x6) | 219,1x165,1 |
KRUIS (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139,7 |
| 150(6) | 165 |
| 200⑻ | 219,1 |
45° Elleboog
22,5° Elleboog
90° elleboog
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 50⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125 (5) | 139,7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219,1 |
VERLOOPSTUK (DRAAD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 50x20(2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25(3x1) | 88.9xRcl |
| 80x65 (3x2-1/2) | 88.9xRc2-1 / 2 |
| 100x25(4x1) | 108xRcl |
| 100x25(4x1) | 114,3xRcl |
| 125x25(5x1) | 133xRcl |
| 125x25(5x1) | 139,7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 159xRc3 |
| 150x25(6x1) | 165. lxRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8xRcl) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
VERLOOPSTUK (GEGROEFD)
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) |
| 65 x 50 (2-1/2 x 2) | 76,1x60,3 |
| 80x50(3x2) | 88.9x60,3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x65(4x2-1/2) | 108x76.1 |
| 100x80(4x3) | 108x88.9 |
| 100x50(4x2) | 114,3x60,3 |
| 100x80(4x3) | 114,3x88,9 |
| 125x65 (5x2-1/2) | 133x76.1 |
| 125x100 (5x4) | 133x114.3 |
| 125x50(5x2) | 139,7x60,3 |
| 125x100 (5x4) | 139,7x114.3 |
| 150x65(6x2-1/2) | 159x76.1 |
| 150x125(6x5) | 159x139,7 |
| 150x50(6x2) | 165,1x60,3 |
| 150x125(6x5) | 165,1x139,7 |
| 200x65(8x2) | 219,1x60,3 |
| 200x150(8x6) | 219,1x165,1 |
ZWARE FLENS
(GEGROEFD)
| NORMALE GROOTTE (mm/in) | BUITENDIAMETER (mm) | WERKDRUK (MPA) | AFMETINGEN (MM) | NEE.VAN GATEN | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2,5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2,5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2,5 | 67,5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2,5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2,5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2,5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219,1 | 2,5 | 77 | 20 | 360 | 310 | 12 |
ADAPTER FLENS
(GEGROEFD)
| NORMALE GROOTTE (mm/in) | BUITENDIAMETER (mm) | WERKDRUK (MPA) | AFMETINGEN (MM) | NEE.VAN GATEN | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139,7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219,1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLINDE FLENS
| NORMALE GROOTTE (mm/in) | BUITENDIAMETER (mm) | WERKDRUK (MPA) | HOOGTE (MM) | |
| 50⑵ | 60.3 | 2,5 | 28 | |
| 65(2-1/2) | 76.1 | 2,5 | 28 | |
| 80⑶ | 88.9 | 2,5 | 29 | |
| 100⑷ | 108 | 2,5 | 31 | |
| 100⑷ | 114.3 | 2,5 | 31 | |
| 125 (5) | 133 | 2,5 | 31,5 | |
| 125⑸ | 139,7 | 2,5 | 31,5 | |
| 150⑹ | 159 | 2,5 | 31,5 | |
| 150⑹ | 165.1 | 2,5 | 31 | |
| 200⑻ | 219,1 | 2,5 | 36.5 | |
DRAADFLENS
| NORMALE GROOTTE (mm/inch) | BUITENDIAMETER (mm) | WERKDRUK (MPA) | AFMETINGEN (MM) | NEE.VAN GATEN | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32(1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40(1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1 / 2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25,75 | 15 | 180 | 213.5 | 8 |
BOUTEN & MOEREN
| MAAT | DRAAD LENGTE L1 | TOTALE LENGTE | BREEDTE VISSTAARTBOUT | MOERBREEDTE |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0.5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14,5 + 0,5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0.5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1.2 | 15.2±0.4 | 11. 6 ~12 |
| M12 x 75 | 41+4 | 75+1.2 | 15.2±0.4 | 11. 6 ~12 |
| M16 x 85 | 44+4 | 85+1.2 | 19. 0-19.9 | 15. 3~16 |
| M20 x 120 | 50+5 | 120+2.0 | 24 ± 0,8 | 18. 9~20 |
De mechanische eigenschappen van bouten mogen niet lager zijn dan klasse 8.8 gespecificeerd in GB / T 3098.1, en de schroefdraadtolerantie moet 6G zijn.De mechanische eigenschappen van de moer moeten voldoen aan de vereisten van klasse 8 die zijn gespecificeerd voor moeren in GB / T 3098.2, draadtolerantie 6h.
PAKKINGRING
| NAAM | PAKKING | ALGEMENE SERVICE AANBEVELING: | TEMPERATUURBEREIK |
| EPDM | E | Watervoorziening, drainage, riolering en normale temperatuurlucht, zwak zuur en zwak alkali | -30°C~+130°C |
| NBR | D | Op petroleum gebaseerde oliën | -20°C〜+80°C |
| SILICONEN RUBBER | S | Drinkwater, hete droge lucht en wat hete chemicaliën | -40°C~+180°C |
Blauw geverfde gegroefde buisfittingen
Maattabel zoals hierboven:
Sliver geverfde gegroefde buisfittingen
Maattabel zoals hierboven:
