Carbon Steel Grooved Fitting
Standard: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etc.
Stahlgrad: GR.A GR.B
Uewerfläch: Rout gemoolt oder blo gemoolt oder sëlwer gemoolt
MECHANICAL CROSS (GROOVED)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 100x50 (4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65 (4x2-1/2) | 114.3x76.1 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139,7x76.1 |
| 125 x 80 (5 x 3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x80 (6x3) | 165.1x88.9 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x80 (8x3) | 219.1x88.9 |
| 200x100 (8x4) | 219.1x114.3 |
MECHANICAL CROSS (THREADED)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 50x25 (2x1) | 60,3 x Rcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88,9 x Rcl |
| 80x50 (3x2) | 88,9xRc2 |
| 100x25 (4x1) | 108 x Rcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125 x 25 (5 x 1) | 133 x Rcl |
| 125 x 80 (5 x 3) | 133xRc3 |
| 125 x 25 (5 x 1) | 139,7 x Rcl |
| 150 x 25 (6 x 1) | 159 x Rcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8x1) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
MECHANICAL TEE (GROOVED)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125 x 80 (5 x 3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x100 (8x4) | 219.1x114.3 |
MECHANICAL TEE (THREADED)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 50x25 (2x1) | 60,3 x Rcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88,9 x Rcl |
| 80x50 (3x2) | 88,9xRc2 |
| 100x25 (4x1) | 108 x Rcl |
| 100x65 (4x2-1/2) | 108xRc2-1/2 |
| 100x25 (4x1) | 114,3 x Rcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125 x 25 (5 x 1) | 133 x Rcl |
| 125 x 80 (5 x 3) | 133xRc3 |
| 125 x 25 (5 x 1) | 139,7 x Rcl |
REDUCERT TEE (GROOVED)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 65x50 (2/1/2x2) | 76.1x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x100 (5x4) | 133x108 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x100 (6x4) | 159x108 |
| 150x125 (6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x50 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
TEE (GRUFF)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 50(2) | 60,3 |
| 65 (2-1/2) | 76,1 |
| 80(3) | 88,9 |
| 100⑷ | 108 |
| 100⑷ | 114,3 |
| 125(5) | 133 |
| 125(5) | 139,7 |
| 150 ⑹ | 159 |
| 150(6) | 165,1 |
| 150 ⑹ | 168,3 |
| 200⑻ | 219,1 |
REDUCERING CROSSE (GRUFF)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 100x65 (4x2-1/2) | 114.3x76 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139,7x76 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x65 (6x2-1/2) | 165.1x76 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x100 (8x4) | 219.1x114.3 |
| 200x150 (8x6) | 219.1x165.1 |
CROSS (GRUCH)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 65 (2-1/2) | 76,1 |
| 80 ⑶ | 88,9 |
| 100⑷ | 114,3 |
| 125⑸ | 139,7 |
| 150(6) | 165 |
| 200⑻ | 219,1 |
45° Ielebou
22,5° Ielebou
90° Ielebou
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 50 ⑵ | 60,3 |
| 65 (2-1/2) | 76,1 |
| 80 ⑶ | 88,9 |
| 100⑷ | 108 |
| 100⑷ | 114,3 |
| 125⑸ | 133 |
| 125(5) | 139,7 |
| 150 ⑹ | 159 |
| 150 ⑹ | 165 |
| 200⑻ | 219,1 |
REDUCER (GREED)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25 (3x1) | 88,9 x Rcl |
| 80x65 (3x2-1/2) | 88.9xRc2-1/2 |
| 100x25 (4x1) | 108 x Rcl |
| 100x25 (4x1) | 114,3 x Rcl |
| 125 x 25 (5 x 1) | 133 x Rcl |
| 125 x 25 (5 x 1) | 139,7 x Rcl |
| 150 x 25 (6 x 1) | 159 x Rcl |
| 150x80 (6x3) | 159xRc3 |
| 150 x 25 (6 x 1) | 165. lxRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200 x 25 (8 x Rcl) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
REDUCER (GERËTT)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50 (3x2) | 88.9x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x65 (4x2-1/2) | 108x76.1 |
| 100x80 (4x3) | 108x88.9 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 133x76.1 |
| 125x100 (5x4) | 133x114,3 |
| 125x50 (5x2) | 139,7x60,3 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x65 (6x2-1/2) | 159x76.1 |
| 150x125 (6x5) | 159x139,7 |
| 150x50 (6x2) | 165.1x60.3 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x65 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
HEAVY DUTY FLANGE
(GERÉISCHT)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) | Aarbechtsdrock (MPA) | Dimensiounen (MM) | NEE.VUN Lächer | |||
| A | B | c | D | ||||
| 65 (2-1/2) | 76,1 | 2.5 | 63,5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88,9 | 2.5 | 63,5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67,5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114,3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150 ⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150 ⑹ | 165,1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219,1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTER FLANGE
(GERÉISCHT)
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) | Aarbechtsdrock (MPA) | Dimensiounen (MM) | NEE.VUN Lächer | |||
| A | B | c | D | ||||
| 50 ⑵ | 60,3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65 (2-1/2) | 76,1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80 ⑶ | 88,9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114,3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139,7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150 ⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150 ⑹ | 165,1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219,1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) | Aarbechtsdrock (MPA) | Hauteur (MM) | |
| 50 ⑵ | 60,3 | 2.5 | 28 | |
| 65 (2-1/2) | 76,1 | 2.5 | 28 | |
| 80 ⑶ | 88,9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114,3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139,7 | 2.5 | 31.5 | |
| 150 ⑹ | 159 | 2.5 | 31.5 | |
| 150 ⑹ | 165,1 | 2.5 | 31 | |
| 200⑻ | 219,1 | 2.5 | 36,5 | |
THREADED FLANGE
| NORMAL GRÉISST (mm/in) | AUSSENDIAMETER (mm) | Aarbechtsdrock (MPA) | Dimensiounen (MM) | NEE.VUN Lächer | |||
| A | B | c | D | ||||
| 25 ⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32 (1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40 (1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65 (2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80 ⑶ | rc3 | 1.6 | 25.5 | 15 | 160 | 193,5 | 8 |
| 100⑷ | rc4 | 1.6 | 25,75 | 15 | 180 | 213,5 | 8 |
BOLTS & NUTS
| GRÉISST | Längt L1 | TOTAL Längt | FISHTAIL BOLT Breet | NUT WIDHT |
| M10 x 55 | 30±3 | 55±1,2 | 14. 5±0.5 | 9.6~10 |
| M10 x 60 | 30±3 | 60±1,2 | 14,5 + 0,5 | 9.6~10 |
| M10 x 65 | 30±3 | 65±1,2 | 14. 5±0.5 | 9.6~10 |
| M12 x 65 | 36+4 | 65±1,2 | 15,2±0,4 | 11.6-12 |
| M12 x 70 | 36+4 | 70+1.2 | 15,2±0,4 | 11.6-12 |
| M12 x 75 | 41+4 | 75+1.2 | 15,2±0,4 | 11.6-12 |
| M16 x 85 | 44+4 | 85+1.2 | 19.0-19.9 | 15.3-16 |
| M20 x 120 | 50+5 | 120+2.0 | 24±0,8 | 18.9-20 |
D'mechanesch Eegeschafte vu Bolzen däerfen net manner sinn wéi de Grad 8.8 spezifizéiert am GB / T 3098.1, an d'Gewënntoleranz soll 6G sinn.Déi mechanesch Eegeschafte vun der Mutter sollen de Grad 8 Ufuerderunge entspriechen, spezifizéiert fir Nëss am GB / T 3098.2, Fuedemtoleranz 6h.
GASKET RING
| NUMM | GASKET | GENERAL SERVICE RECOMMENDATION | TEMPERATURE RANGE |
| EPDM | E | Waasserversuergung, Drainage, Kläranlag an normal Temperatur Loft, schwaach Säure a schwaach Alkali | -30°C~+130°C |
| NBR | D | Petroleum baséiert Ueleg | -20°C bis +80°C |
| SILICOMN GUMMI | S | Drénkwaasser, waarm dréchen Loft an e puer waarm Chemikalien | -40°C~+180°C |
Blo gemoolt Grooved Pipe Fittings
Gréisst Diagramm wéi uewen
Sliver gemoolt Grooved Pipe Fittings
Gréisst Diagramm wéi uewen
