Wy hawwe miskien wol de meast moderne produksjeapparatuer, betûfte en kwalifisearre yngenieurs en arbeiders, erkende handgreepsystemen fan topkwaliteit, tegearre mei in freonlike saakkundige ferkeapteam foar- en neiferkeapstipe foar Professional China Unf/ISO/SAE Equal Tee Brass Female Elbow Pushfit Union Pipe Fitting. Wy hawwe in betûft team foar ynternasjonale hannel. Wy sille it probleem oplosse dat jo tsjinkomme. Wy kinne de guod leverje dy't jo wolle. Nim gerêst kontakt mei ús op.
Wy hawwe miskien wol de meast moderne produksjeapparatuer, betûfte en kwalifisearre yngenieurs en arbeiders, erkende handgreepsystemen fan topkwaliteit en in freonlik saakkundich ferkeapteam foar- en nei-ferkeapstipe foar...Sina Tube Fitting, KoppelingMei earsteklasse guod, poerbêste tsjinst, snelle levering en de bêste priis, hawwe wy no hege lof wûn fan bûtenlânske klanten. Us artikels binne eksportearre nei Afrika, it Midden-Easten, Súdeast-Aazje en oare regio's.
Tianjin Youfa Ynternasjonale Hannel Co., Ltd.
Groeven fitting fan koalstofstiel
Standert: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 ensfh.
Stielklasse: GR.A GR.B
Oerflak: Read skildere of blau skildere of sulver skildere
MEGANYSK KRUS (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65 (4x2-1/2) | 114.3x76.1 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x 76.1 |
| 150x80 (6x3) | 165.1x88.9 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x80 (8x3) | 219.1x88.9 |
| 200x100 (8x4) | 219.1x114.3 |
MEGANYSK KRÚS (SKRAADFOL)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 165. 1xTc3 |
| 200x25 (8x1) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xTk3 |
MEGANYSK T-STUK (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x100 (8x4) | 219.1x114.3 |
MEGANYSKE T-STUK (SKRAAD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 108xRc2-1/2 |
| 100x25 (4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
Ferminderjende T-stuk (groefd)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 65x50 (2/1/2x2) | 76.1x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x100 (5x4) | 133x108 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x100 (6x4) | 159x108 |
| 150x125 (6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76.1 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x50 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
T-stuk (groefd)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50(2) | 60.3 |
| 65 (2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
Ferminderjend krús (groefd)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 100x65 (4x2-1/2) | 114.3x76 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x65 (6x2-1/2) | 165.1x76 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x100 (8x4) | 219.1x114.3 |
| 200x150 (8x6) | 219.1x165.1 |
KRUS (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 65 (2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° Elbow
22.5° Elbow
90° elleboog
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50⑵ | 60.3 |
| 65 (2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUCER (SKRAAD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xTc2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x65 (3x2-1/2) | 88.9xRc2-1/2 |
| 100x25 (4x1) | 108xRcl |
| 100x25 (4x1) | 114.3xRcl |
| 125x25 (5x1) | 133xRcl |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 159xRc3 |
| 150x25 (6x1) | 165. lxRcl |
| 150x80 (6x3) | 165. 1xTc3 |
| 200x25 (8xRcl) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xTk3 |
FERLICHTING (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50 (3x2) | 88.9x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x65 (4x2-1/2) | 108x76.1 |
| 100x80 (4x3) | 108x88.9 |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 133x76.1 |
| 125x100 (5x4) | 133x114.3 |
| 125x50 (5x2) | 139.7x60.3 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x65 (6x2-1/2) | 159x76.1 |
| 150x125 (6x5) | 159x139.7 |
| 150x50 (6x2) | 165.1x60.3 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x65 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
Swiere wurkflens
(GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | AFMETINGEN (MM) | OANTAL GATEN | |||
| A | B | c | D | ||||
| 65 (2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTERFLENS
(GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | AFMETINGEN (MM) | OANTAL GATEN | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65 (2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLINDE FLENS
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | HICHTE (MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65 (2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
DRAADFLENS
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | AFMETINGEN (MM) | OANTAL GATEN | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32 (1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40 (1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65 (2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOUTEN EN MOEREN
| GRUTTE | SKRAADLENGTE L1 | TOTALE LINGTE | FISHTAIL BOLT BREEDTE | MOERBREEDTE |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14,5 + 0,5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15,2±0,4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1. 2 | 15,2±0,4 | 11. 6 ~12 |
| M12 x 75 | 41+4 | 75+1. 2 | 15,2±0,4 | 11. 6 ~12 |
| M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3~16 |
| M20 x 120 | 50+5 | 120+2.0 | 24±0.8 | 18. 9~20 |
De meganyske eigenskippen fan bouten meie net leger wêze as klasse 8.8 spesifisearre yn GB / T 3098.1, en de triedtolerânsje moat 6G wêze. De meganyske eigenskippen fan 'e moer moatte foldwaan oan' e easken fan klasse 8 spesifisearre foar moeren yn GB / T 3098.2, triedtolerânsje 6h.
PAKKINGRING
| NAMME | PAKKING | ALGEMENE TSJINST OANBEFELING | TEMPERATUURBERIK |
| EPDM | E | Wetterfoarsjenning, ôfwettering, rioelwetter en normale temperatuerlucht, swak soer en swak alkali | -30°C~+130°C |
| NBR | D | Oaljes op basis fan petroleum | -20 °C〜+80 °C |
| SILISIKOMRUBBER | S | Drinkwetter, waarme droege loft en guon waarme gemikaliën | -40°C~+180°C |
Blau skildere groeven piipfittingen
Maattabel lykas hjirboppe
Sliver skildere groeven piipfittings
Maattabel lykas hjirboppe
Koalstofstiel Butt Welded en Seamless Pipe Fitting
Smeedber izer galvanisearre en swarte fitting
Flens
WOLLE JO MEI ÚS WURKJE?
-
Hot ferkeap A283 Gr.b Q195 Stk400 stiel laske buis
-
Nij oankomst hjit-dipped galvanisearre stielen piip ...
-
Hot Sale foar Hot Dipped Sch40 Erw Q235 Galvaniz ...
-
Fabryk Goedkeap Stielen Pipe Round Black Iron Gi Pi ...
-
Bêste priis op galvanisearre milde rjochthoekige Erw W ...
-
Produksjebedriuwen foar tichtens 60 × 60 ...