Us ûntwikkeling hinget ôf fan 'e avansearre apparatuer, poerbêste talinten en kontinu fersterke technologyske krêften foar Priisblêd foar Sina Fabrikant Tee / Pipe Elbow / Flange HDPE Pipe Fitting mei Butt Fusion Welding / Electrofusion foar Irrigaasje / Wetterfoarsjenning / Mynbou. Wy ferwolkomje keapers fan oer de hiele wrâld folslein om stabile en wjersidich effektive bedriuwsynteraksjes te garandearjen, om in prachtige lange termyn tegearre te hawwen.
Us ûntwikkeling hinget ôf fan 'e avansearre apparatuer, poerbêste talinten en kontinu fersterke technologyske krêften foarSina HDPE-fitting, HDPE-piipUs produkten en oplossingen binne benammen eksportearre nei Súdeast-Aazje, Europa en Amearika, en ferkocht oan hiel ús lân. En ôfhinklik fan poerbêste kwaliteit, ridlike priis, bêste tsjinst, hawwe wy no goede feedback krigen fan klanten yn it bûtenlân. Jo binne wolkom om mei ús mei te dwaan foar mear mooglikheden en foardielen. Wy ferwolkomje klanten, bedriuwsferienings en freonen út alle dielen fan 'e wrâld om kontakt mei ús op te nimmen en gearwurking te sykjen foar wjersidich foardiel.
Tianjin Youfa Ynternasjonale Hannel Co., Ltd.
Groeven fitting fan koalstofstiel
Standert: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 ensfh.
Stielklasse: GR.A GR.B
Oerflak: Read skildere of blau skildere of sulver skildere
MEGANYSK KRUS (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65 (4x2-1/2) | 114.3x76.1 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x 76.1 |
| 150x80 (6x3) | 165.1x88.9 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x80 (8x3) | 219.1x88.9 |
| 200x100 (8x4) | 219.1x114.3 |
MEGANYSK KRÚS (SKRAADFOL)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 165. 1xTc3 |
| 200x25 (8x1) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xTk3 |
MEGANYSK T-STUK (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x100 (8x4) | 219.1x114.3 |
MEGANYSKE T-STUK (SKRAAD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 108xRc2-1/2 |
| 100x25 (4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
Ferminderjende T-stuk (groefd)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 65x50 (2/1/2x2) | 76.1x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x100 (5x4) | 133x108 |
| 125x65 (5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x100 (6x4) | 159x108 |
| 150x125 (6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76.1 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x50 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
T-STUK (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50(2) | 60.3 |
| 65 (2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
Ferminderjend krús (groefd)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 100x65 (4x2-1/2) | 114.3x76 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 139.7x76 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x65 (6x2-1/2) | 165.1x76 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x100 (8x4) | 219.1x114.3 |
| 200x150 (8x6) | 219.1x165.1 |
KRUS (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 65 (2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° Elbow
22.5° Elbow
90° elleboog
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50⑵ | 60.3 |
| 65 (2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUCER (SKRAAD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xTc2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x65 (3x2-1/2) | 88.9xRc2-1/2 |
| 100x25 (4x1) | 108xRcl |
| 100x25 (4x1) | 114.3xRcl |
| 125x25 (5x1) | 133xRcl |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 159xRc3 |
| 150x25 (6x1) | 165. lxRcl |
| 150x80 (6x3) | 165. 1xTc3 |
| 200x25 (8xRcl) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xTk3 |
FERLICHTING (GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50 (3x2) | 88.9x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x65 (4x2-1/2) | 108x76.1 |
| 100x80 (4x3) | 108x88.9 |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65 (5x2-1/2) | 133x76.1 |
| 125x100 (5x4) | 133x114.3 |
| 125x50 (5x2) | 139.7x60.3 |
| 125x100 (5x4) | 139,7x114,3 |
| 150x65 (6x2-1/2) | 159x76.1 |
| 150x125 (6x5) | 159x139.7 |
| 150x50 (6x2) | 165.1x60.3 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x65 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
Swiere wurkflens
(GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | AFMETINGEN (MM) | OANTAL GATEN | |||
| A | B | c | D | ||||
| 65 (2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTERFLENS
(GROEFD)
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | AFMETINGEN (MM) | OANTAL GATEN | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65 (2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLINDE FLENS
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | HICHTE (MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65 (2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
DRAADFLENS
| NORMALE GRUTTE (mm/inch) | BÛTENDIAMETER (mm) | WURKDRUK (MPA) | AFMETINGEN (MM) | OANTAL GATEN | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32 (1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40 (1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65 (2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOUTEN EN MOEREN
| GRUTTE | SKRAADLENGTE L1 | TOTALE LINGTE | FISHTAIL BOLT BREEDTE | MOERBREEDTE |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14,5 + 0,5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15,2±0,4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1. 2 | 15,2±0,4 | 11. 6 ~12 |
| M12 x 75 | 41+4 | 75+1. 2 | 15,2±0,4 | 11. 6 ~12 |
| M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3~16 |
| M20 x 120 | 50+5 | 120+2.0 | 24±0.8 | 18. 9~20 |
De meganyske eigenskippen fan bouten meie net leger wêze as klasse 8.8 spesifisearre yn GB / T 3098.1, en de triedtolerânsje moat 6G wêze. De meganyske eigenskippen fan 'e moer moatte foldwaan oan' e easken fan klasse 8 spesifisearre foar moeren yn GB / T 3098.2, triedtolerânsje 6h.
PAKKINGRING
| NAMME | PAKKING | ALGEMENE TSJINST OANBEFELING | TEMPERATUURBERIK |
| EPDM | E | Wetterfoarsjenning, ôfwettering, rioelwetter en normale temperatuerlucht, swak soer en swak alkali | -30°C~+130°C |
| NBR | D | Oaljes op basis fan petroleum | -20 °C〜+80 °C |
| SILISIKOMRUBBER | S | Drinkwetter, waarme droege loft en guon waarme gemikaliën | -40°C~+180°C |
Blau skildereGroefde piipfittingen
Maattabel lykas hjirboppe
Sliver skildereGroefde piipfittingen
Maattabel lykas hjirboppe
Koalstofstiel Butt Welded en Seamless Pipe Fitting
Smeedber izer galvanisearre en swarte fitting
Flens
WOLLE JO MEI ÚS WURKJE?
-
OEM/ODM Fabriek Laske Stielen Pipe/ssaw Pipe/ste ...
-
Sina Groothandel Q345e 300mm Diameter Stielen Pipe ...
-
18 jier fabryk ASTM A106 / Api 5l / ASTM A53 G ...
-
Nije oankomst Sina stielen piip foar buis en ...
-
Hege definysje normalisaasje laske 12x12mm fjouwerkante ...
-
Leechste priis foar boumateriaal galvanisearre ...