Tšebeliso ea karolo e sekoere le e khutlonnetsepa e nang le sekoti
Sekwere tube ke thepa e ka sehloohong le ea bohlokoa bakeng sa litsamaiso tsa tšehetso ea photovoltaic ka lebaka la ts'ebetso ea eona e ntle ea sebopeho le katleho ea litšenyehelo. Liphaephe tsa tšepe ea carbon ea square ea cha ea Youfa li sebelisoa haholo mohahong oa tšehetso ea letsatsi, le thekisong e chesang Bochabela bo Hare le Afrika.
Liphaephe tse sekwere tse khutlonnetsepali sebelisoa haholo tlhahisong ea li-bracket tsa photovoltaic ka lebaka la thepa ea tsona e ntle ea mechini le botsitso ba sebopeho. Li-bracket tsa photovoltaic ke karolo ea bohlokoa ea sistimi ea tlhahiso ea motlakase oa photovoltaic ea letsatsi, haholo-holo e sebelisetsoang ho tšehetsa le ho lokisa liphanele tsa letsatsi. Tšebeliso ea lipeipi tse sekwere tse khutlonnetsepa e le thepa ea tšehetso e na le melemo e latelang:
Matla a phahameng:Sebopeho sa karolo e tshekaletseng ya phaephe e kgutlonnetsepa e e fa matla a maholo ha e le tlasa meroalo e telele le e tshekaletseng, e hanela mabaka a kantle ka katleho jwalo ka kgatello ya moya le kgatello ya lehlwa.
Botsitso bo botle:Moralo oa sebopeho sa tube e sekwere o netefatsa botsitso bo botle kamora ho kenngoa, o fokotsa ho fetoha ho bakoang ke matla a kantle.
Ho bonolo ho sebetsana le eona:Ho sebetsana le lipeipi tse sekwere le tse khutlonnetsepa ho bonolo haholo, 'me ho ka sehoa, ha tjheselletsoa, le ho phekoloa bokaholimo ho latela litlhoko tsa sebele, e leng se etsang hore ho kenngoa le ho hlokomeloa ho be bonolo.
E bobebe:Ha ho bapisoa le thepa e 'ngoe, liphaephe tse sekwere tse khutlonnetsepa li bobebe ka boima, e leng se etsang hore ho be bonolo ho li tsamaisa le ho li kenya, 'me se fokotsa litšenyehelo tsa kaho.
Khanyetso ea ts'enyeho:Liphaephe tse sekwere tse khutlonnetsepa tse kileng tsa phekoloa holim'a metsi li na le khanyetso e ntle ea mafome 'me li ka ikamahanya le maemo a fapaneng a leholimo, li eketsa nako ea tsona ea ts'ebeletso.
Moruo:Litšenyehelo tsa tlhahiso ea lipeipi tse sekoere le tse khutlonnetsepa li tlase haholo, li loketse lits'ebetso tse kholo, 'me li ka fokotsa litšenyehelo tsohle tsa litsamaiso tsa tlhahiso ea motlakase oa photovoltaic ka katleho.
Tšebeletso e ntle ea kamora thekiso:Letšoao la Youfa le na le botumo bo botle 'marakeng, le fana ka tšebeletso ea boleng bo holimo ea kamora thekiso ho netefatsa khotsofalo ea bareki nakong ea ts'ebeliso.
Ka hona, ts'ebeliso ea lipeipi tse sekwere tse khutlonnetsepa litšehetsong tsa photovoltaic ha e ntlafatse feela ts'ebetso ea litšehetso, empa hape e khothalletsa nts'etsopele ea indasteri ea photovoltaic.
Litekanyetso tsa karolo ea tšepe ea sebopeho sa letsatsi tse sekwere le tse khutlonnetsepa
| Maemo | GB/T 6728-2017 | ASTM A500-2023 | EN10219-1: 2006; EN10219-2: 2019 |
| Kereiti ea Tšepe ea Boitsebiso | Q195 Q235 Q355 | Sehlopha sa A Sehlopha sa B Sehlopha sa C | S195 S235 S355JR |
| Mamello ea Bophara ba Kantle | (100mm hole le lipheletsong) A=130mm: +/-1mm A=140mm: +/-1.1mm A=150 kapa 160 mm: +/-1.2mm | (50mm hole le lipheletso) 65 90 A ＞140mm: 0.01xA | A<100: +/-1% (Bonyane 0.5mm) 100 A> 200mm: 0.6% |
| Mamello ea Botenya | Boima ba 'mele≤10mm: +/-10% Boima ba 'mele ＞10mm: +/-8% | +/-10% | Boima ba 'mele≤5mm: +/-10% Boima ba 'mele ＞5mm: 0.5mm |
| R | ≤3WT | ≤3WT | Boima≤6mm: ≤2.4WT 6＜WT≤10mm: ≤3WT Boima ba 'mele ＞10mm: ≤3.6WT |
| Ho Khutsufala le ho Khutsufala | 0.6%xA (Bonyane 0.4mm) | 0.8% (Bonyane.0.5mm) | |
| Sotha | 2mm+Lx0.5/1000mm | A≤40: 1.3mm/m 40 65 100 150 200 | 2mm＋0.5mm/1m |
| Bolelele ba lehlakore | A≤100mm: 2mm 100 300 | 90°+/-2° | 90°+/-1° |
| Ho tiea | 0.15% ea bolelele bohle le 2mm holim'a bolelele bofe kapa bofe ba 1m | 10mm x L(m) /5 | 0.15% ea bolelele bohle le 3mm holim'a bolelele bofe kapa bofe ba 1m |
| Bophahamo ba Sefaha sa Weld | - | - | Boima ba 'mele≤14.2mm: 3.5mm Boima ba 'mele ＞14.2mm: 4.8mm |
Nako ea poso: Mphalane-28-2025